Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
87 mitsubishi montero / cylinder head torque specs. #757078 10/11/06 09:27 PM
Joined: Sep 2006
Posts: 3
M
mkgrizz Offline OP
Need a Spot
Anybody have the cylinder head torque specs. for the Montero 4 cyl. 2.6L., specifically the caps that hold the overhead cam in place. Appreciate any info. !!

Re: 87 mitsubishi montero / cylinder head torque specs. [Re: mkgrizz] #757079 10/11/06 11:13 PM
Joined: Apr 2000
Posts: 619
Angel Carlo Offline
Rock Warrior
head bolts are cold engine...65-72 ft.lbs
" " hot engine...73-79 ft.lbs

Camshaft bearing cap bolts...14.15ft.lbs

Hope this helps.


1987 Dodge Raider rebuilt Quest block bored .040 over put together, and installed by Shelby. 5spd, '87 stock turbo, Intercooled, 2.5" exhaust. MPI with hard pipes, FIP Pro-4, MSextra MS1
Re: 87 mitsubishi montero / cylinder head torque specs. [Re: Angel Carlo] #757080 10/12/06 03:26 AM
Joined: Feb 2004
Posts: 10,238
FrankR Offline
Web Wheeler
****
Cylinder head bolt torque specs were revised for several engines. Both the 2.6L and the 3.0L head bolt torque specs are 80 lb-ft..... hot or cold.

Frank


'89 [color:"white"]G-Raider[color:"white"] [color:"black"]Supercharged 3.0L, MegaSquirt 2, lockup A/T, 2.5" exhaust, 172k, Cibie H4s/Oscar SCs, Hella Micro DE fogs, Cobra CB, Superwinch hubs, LSD rear/Aussie Locker front, Bilsteins, Lifeline AGM, Rust-Oleum
Re: 87 mitsubishi montero / cylinder head torque specs. [Re: Angel Carlo] #757081 10/12/06 12:57 PM
Joined: Sep 2006
Posts: 3
M
mkgrizz Offline OP
Need a Spot
hey thanks!!!!!! To all who gave info...having too much fun.








4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.6014 MB (Peak: 0.6565 MB) Data Comp: Off Server Time: 2026-06-20 21:44:21 UTC
Valid HTML 5 and Valid CSS