Brake drum removal bolt size?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Brake drum removal bolt size? #758559 10/17/06 05:08 AM

Joined: Mar 2006

Posts: 74

Colorado

btn

Getting the Wheeling Fever

Anyone know the size and pitch of the bolt holes in the rear drums that you can use to push the drum off the axle on the 89-95 trucks?

thanks!!

1989 reg cab pickup, 22re, 31s, 4.56s, rear ARB, rear OME springs, RS9000s, otherwise stock.

Re: Brake drum removal bolt size? [Re: btn] #758560 10/17/06 05:30 AM

Anonymous

Unregistered

Should be M8x1.25

Re: Brake drum removal bolt size? #758561 10/17/06 05:57 AM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

Yep, that is the size, about 50mm long works well. Use lots of anti-sieze on the threads and alternate between tightening the two bolts.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 0.005s Queries: 15 (0.004s) Memory: 0.5929 MB (Peak: 0.6459 MB) Data Comp: Off Server Time: 2026-06-07 02:17:38 UTC
Valid HTML 5 and Valid CSS