Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
4-link question #761224 10/28/06 01:24 PM
Joined: Aug 2006
Posts: 43
jeeyguy310 Offline OP
Getting the Wheeling Fever
hey, So we are in the process of building a quarter eliptical 4-link setup in the rear of my 94 wrangler, I was just wondering if anybody has done this before, and if so what did you do about the rear section of frame. We did it on a toyota pickup, but we cut the back section of frame off. I dont think I could do that on my jeep because there would be no way to hold the body up. Any sugestions would help a bunch. thanks guys. <img src="/forums/images/graemlins/kewl.gif" alt="" />


01 Tacoma 3 inch suspension, 3 inch body 35's
94 wrangler 5.5 inch springs, 4 inch body 37's
Re: 4-link question [Re: jeeyguy310] #761225 10/30/06 05:39 AM
Joined: Oct 1999
Posts: 2,211
S
superdawg Offline
Body Damage is Cool
http://crawlertech4x4.com/crawlertech4x41062_022.htm

This is one I built a couple years ago.
Coils (recomended over qlips) but the same idea.

SD


Moderated by  4x4Wire 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5859 MB (Peak: 0.6338 MB) Data Comp: Off Server Time: 2026-06-21 12:06:58 UTC
Valid HTML 5 and Valid CSS