Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Front Transmission seal Question #762373 11/02/06 03:38 AM
Joined: Sep 2004
Posts: 132
Y
yota89 Offline OP
Wheeler
When looking at the housing from this side, which side of the seal should be facing me the smooth side or the spring side. The origianl seal was so bad it was completly gone, and I dont know which way it was installed.

Thanks

[Linked Image]


89 yota pickup
22RE 261C cam
Tanny / engine rebuilt after 256K
Head machined to RV street spec(EB's)
Re: Front Transmission seal Question [Re: yota89] #762374 11/02/06 06:41 AM
Joined: May 2006
Posts: 457
D
Davepet Offline
Mudrunner
I don't recall a spring, but the smooth side goes away from you as you look at your picture.


Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5858 MB (Peak: 0.6336 MB) Data Comp: Off Server Time: 2026-05-29 17:28:34 UTC
Valid HTML 5 and Valid CSS