Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
tie rods #763831 11/08/06 10:49 PM
Joined: Feb 2006
Posts: 77
H
Hal2000 Offline OP
Getting the Wheeling Fever
I ordered some replacement tie rods and they showed up without the nuts and cotter pin. Anyone happen to know what size the nuts are?


98 Sportage
Re: tie rods [Re: Hal2000] #763832 11/09/06 06:24 PM
Joined: Feb 2006
Posts: 77
H
Hal2000 Offline OP
Getting the Wheeling Fever
Well after going to the hardware store I got the nuts I needed for the tie rods.. they are 12mm 1.25 pitch tread. Just in case some needs to know


98 Sportage

Moderated by  4x4Wire, Axe Man, DamKia 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.005s Queries: 15 (0.004s) Memory: 0.5850 MB (Peak: 0.6329 MB) Data Comp: Off Server Time: 2026-05-25 15:01:23 UTC
Valid HTML 5 and Valid CSS