Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
4X4 not working properly #765735 11/16/06 09:19 PM
Joined: Oct 2006
Posts: 19
D
dozier13 Offline OP
Need a Spot
hey everyone, took my 89 trooper out in the woods last night and got stuck!! transfered it into 4wd but nothing happened, just kept spinning. after I got it unstuck I took it to my garage and started playing around with it. I had someone get in and drive it while I looked at the front drive shaft and sure enough it was spinning...so Im getting the power from the transfer case but its just not going to the wheels... any thoughts

Chris

Re: 4X4 not working properly [Re: dozier13] #765736 11/16/06 10:29 PM
Joined: Jan 2005
Posts: 1,528
barak Offline
Body Damage is Cool
Auto or manual hubs? If auto the C clips could have fallen off.If they are manual , did you have them fully locked in?


1996 Jeep Grand Cherokee 5.2 with mods.Hughes Air gap intake , 52MM TB , ford injectors, 2 3/4" lift, Doug Thorley headers , HID headlights with LED , HID fog lights , glow gauges , a few others
Re: 4X4 not working properly [Re: barak] #765737 11/16/06 10:37 PM
Joined: Oct 2006
Posts: 19
D
dozier13 Offline OP
Need a Spot
thanks for the quick reply.. after taking them apart I found that the C Clip had fallen out of the drivers side hub assembly... hate these stupid auto locking hubs!! wish I could afford the warn set or manual locking hubs..thanks








4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.005s Queries: 15 (0.004s) Memory: 0.5946 MB (Peak: 0.6477 MB) Data Comp: Off Server Time: 2026-06-07 06:35:39 UTC
Valid HTML 5 and Valid CSS