I found a 6-foot plow setup complete, that came off of a CJ5 jeep. I thought it was a Meyer, at least the pump is. The frame rails seem to be the same width on the Raider as a CJ5 and there are plenty of weld nuts to attach it to. I had to modify (shorten and re-weld) the push frame and weld 2 "tabs" onto the tubular cross member. I believe you could use u-bolts and a plate if you can't weld to the vehicle. If you're by yourself, I'd recommend one of the newer plow hookups that self-align and "click" on and off. Maybe you could have someone fab adapters. Also, get power angle (all the new stuff is anyway.) I'm working on mine soon. I'm going to take pictures.

http://www.facebook.com/photo.php?pid=708526&l=3c8bd582de&id=1616543971