Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 3 of 3 1 2 3
Re: starion conversion [Re: runningbird] #1000529 10/10/10 05:10 PM
Joined: Feb 2005
Posts: 1,511
ryany Offline
Body Damage is Cool
I don't know of any machine shops on the South side, but I've had good luck with RnR Machine near Peoria/19th Ave. I've used them several times, including the valve job on my existing 3.5 DOHC heads a few years ago.


95 Montero SR
3.8 MIVEC, Advance headers, 2 1/2" exhaust, Magnaflow muffler, OME shocks & rear springs, 2" body lift, 3" tank lift, 4.90s, TRE front locker, factory rear locker, Roger Brown Rock Sliderz, 315/75r16 (35") tires, Sport big brakes
Re: starion conversion [Re: ryany] #1000530 10/12/10 03:56 AM
Joined: Mar 2004
Posts: 172
runningbird Offline OP
Wheeler
thanks for the info, will try and head over that way tomorrow.


87 raider starion motor in, looking for an auto trans.
Re: starion conversion [Re: runningbird] #1000531 10/12/10 07:05 PM
Joined: Mar 2004
Posts: 172
runningbird Offline OP
Wheeler
well I won't be heading to the machine shop today. I need to figure out what I need done first. On further inspection of my situation it looks like my 89 starion crank/ driveplate setup is different than most. if anyone has a chance check out my thread on the main link.
thanks,
Mark


87 raider starion motor in, looking for an auto trans.
Page 3 of 3 1 2 3

Moderated by  4x4Wire, TOASTY 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.007s Queries: 16 (0.004s) Memory: 0.5985 MB (Peak: 0.6677 MB) Data Comp: Off Server Time: 2026-06-13 14:14:30 UTC
Valid HTML 5 and Valid CSS