|
|
|
|
 Re: Toyota wheels and Magnaflow installed, pics and vid
[Re: monty84]
#1000677
06/22/10 09:48 PM
|
Joined: Mar 2010
Posts: 64
OP
Getting the Wheeling Fever
|
I have the 15x7 landcruiser alloys on my rig, and the stock lugnuts fit just fine. if by 'fit just fine' you mean it holds the wheel on there then yes. But it isn't the way it's supposed to be and you could lose a wheel while driving. You should at least go ask a tire shop about it for peace of mind.
1989 SWB V6 5 speed 230K
|
|
|
Re: Toyota wheels and Magnaflow installed, pics and vid
[Re: BoiseMontero]
#1000678
06/23/10 07:58 AM
|
Joined: May 2010
Posts: 67
Getting the Wheeling Fever
|
I think I will have a closer look cause That's exactly what I meant by fit just fine.
'84 Monty SWB, 2.6 Manual, rear LSD, bOuNcY, cranked T Bars, 33x12.5 M/T's
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.005s Queries: 16 (0.004s) Memory: 0.5944 MB (Peak: 0.6591 MB) Data Comp: Off Server Time: 2026-05-28 12:58:54 UTCValid HTML 5 and Valid CSS 
