Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
My custom rear bumper #1000680 06/20/10 01:20 AM
Joined: Nov 2001
Posts: 650
Kirk Offline OP
Rock Warrior
I actually made this a few years ago but I never posted pics and I forgot to take pics during the construction. It's 2" box 1/8" wall. this was the first project I did with my home center special stick welder.

[Linked Image]

[Linked Image]

[Linked Image]

[Linked Image]

If I had to do it again I would cut the end of the frame rails so I could extend the lower portion of the bumper another 3" toward the outside. Also after I had it mounted I realized that it wasn't far enough to the rear so that could step on it when the rear door was closed so I added another 1" in depth with a piece of 1x2 channel.


'96 SR, 35's, body lift, arb front bumper, Custom rear rock bumper, rock sliders.
'89 Raider V6 w/ SR rear axle & locker
Kirk's Montero page but not updated in forever
KJ6GVJ
Re: My custom rear bumper [Re: Kirk] #1000681 06/20/10 02:20 AM
Joined: Dec 2007
Posts: 2,348
Mudraider Offline
Body Damage is Cool
Looks good man. If you would have posted it when you did it you probably would have beem one of the first to have done it. Hows the truck look overall? Lets see some more pics.


89 SWB, V-6 5SPD, OME Shocks, 16.5X37's, 2"BL, SR axle, Gen2 brakes, Lincoln w/Superwinch
Re: My custom rear bumper [Re: Kirk] #1000682 06/20/10 02:54 AM
Joined: Jan 2000
Posts: 7,309
PHIL_ Offline
Trail Leader
*****
Thanks Kirk - looks very sturdy. And the lights in there make it almost oe! <img src="/forums/images/graemlins/lol.gif" alt="" />

Nice work.

<img src="/forums/images/graemlins/kewl.gif" alt="" />


1991 HZJ77, 1999 KZJ90, 1999 UZJ100, 1992 M101CDN2
https://www.thegearheadproject.com/category/jdm-journeys/

Re: My custom rear bumper [Re: PHIL_] #1000683 06/20/10 05:59 AM
Joined: May 2007
Posts: 4,628
hazy_daze Offline
Roll Me Over
*****
The design and execution look great. Only downside I see is the 1/8" wall. IMHO, it's a little on the thin side if it's going to be used to hi-lift on... Or have you done that already and it's held up?

I do really like the reverse light integration. Super slick... <img src="/forums/images/graemlins/kewl.gif" alt="" />


Fasteddy's advice is occasionally sound...
Re: My custom rear bumper [Re: hazy_daze] #1000684 06/21/10 06:23 AM
Joined: Nov 2001
Posts: 650
Kirk Offline OP
Rock Warrior
Thanks everyone. I have used the hi-lift a number of times without a problem. I chose 1/8" because of the weight. picking up the thing now I just couldn't imagine it weighing twice as much. I'll post up a couple more pics of the rig a little later,


'96 SR, 35's, body lift, arb front bumper, Custom rear rock bumper, rock sliders.
'89 Raider V6 w/ SR rear axle & locker
Kirk's Montero page but not updated in forever
KJ6GVJ
Re: My custom rear bumper [Re: Kirk] #1000685 06/22/10 12:57 AM
Joined: Nov 2001
Posts: 650
Kirk Offline OP
Rock Warrior
Here's a few more pics.
[Linked Image]

[Linked Image]

[Linked Image]

[Linked Image]


'96 SR, 35's, body lift, arb front bumper, Custom rear rock bumper, rock sliders.
'89 Raider V6 w/ SR rear axle & locker
Kirk's Montero page but not updated in forever
KJ6GVJ
Re: My custom rear bumper [Re: Kirk] #1000686 06/22/10 01:52 PM
Joined: Nov 2009
Posts: 227
xFezx Offline
Wheeler
Nice custom bumper, so what happen to the '95? I really love these gen IIs, though I can't wait to get a gen III for my wife and daughter someday too...oorah!


You can call me Fez
'95 SR 15x8 steel rims w/ 33x12.5 Duratracs, cranked torsion bars, "Baja" lights
'09 Nissan Sentra SR
Re: My custom rear bumper [Re: xFezx] #1000687 06/23/10 05:08 AM
Joined: Nov 2001
Posts: 650
Kirk Offline OP
Rock Warrior
The '95 is in my garage with a dead transmission. I could have replaced it but there were a number of other things wrong so I decided to get the '96 with the 3.5. I'll probably part out the '95. I figure the 5.29's and the ARB locker should be worth enough for me to buy a set of 3.15s for the t-case.


'96 SR, 35's, body lift, arb front bumper, Custom rear rock bumper, rock sliders.
'89 Raider V6 w/ SR rear axle & locker
Kirk's Montero page but not updated in forever
KJ6GVJ
Re: My custom rear bumper [Re: Kirk] #1000688 06/23/10 06:02 AM
Joined: Jun 2002
Posts: 6,211
JohnnyBfromPeoria Offline
Trail Leader
*****
Kirk, check your PM's. Maybe we should converse...

John B.


'87 Raider 2.6 Turbo Auto, Under Construction
'95 Montero SR, 35x12.5/15 BFG M/T KM-2's, Rock sliders, Qtr panel chop, gas tank lift, 2" BL, Aisins, 5.29s
'95 Pajero Mini
'98 Montero Winter Ed.
'04 Cadillac XLR
'03 Kawasaki ZRX1200R
'60 Ford Falcon 4Dr







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 3.048s Queries: 15 (0.009s) Memory: 0.6302 MB (Peak: 0.7354 MB) Data Comp: Off Server Time: 2026-07-15 06:20:46 UTC
Valid HTML 5 and Valid CSS