Gen III wheel bearings

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Gen III wheel bearings [Re: KrzyDav] #1000804 06/24/10 04:41 PM

Joined: Apr 2010

Posts: 99

California

Inyo_man

Getting the Wheeling Fever

Thanks for the info.
That's the same set of facts I found.
I appreciate the assistance.

'02 Montero: OME suspension, ARB front bumper, homemade skid plates & spare tire Blitz can mount, extended diff. breather, K&N air filter, Optima Yellow Top, BajaRack, IPF lights, Goodyear Duratrac 265/75/16's, RUD 4x4 Grip chains

Entire Thread
Subject	Posted By	Posted
Gen III wheel bearings	Inyo_man	06/22/10 03:35 AM
Re: Gen III wheel bearings	dougl3nc	06/23/10 06:21 PM
Re: Gen III wheel bearings	KrzyDav	06/24/10 06:21 AM
Re: Gen III wheel bearings	Inyo_man	06/24/10 04:41 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.521s Queries: 16 (3.519s) Memory: 0.5982 MB (Peak: 0.6312 MB) Data Comp: Off Server Time: 2026-06-11 19:06:05 UTC
Valid HTML 5 and Valid CSS