No sprayer nozzles. Also, no sliding rear window latches. I really need two of those.

The big mystery, to me, though, was the front driver's side quarter window. Mine doesn't have a handle anymore, so it can't be latched. It looked like it was going to be pretty simple to just take the whole piece of glass with the latch attached to it, but I couldn't figure out how to get the stupid thing out of the door. What's the deal with those things?

I need to find a nice set of front seats. The ones that were there were marginal, at best, but better than the ones I have. But for $30 each, they weren't good enough, I decided.

I put the proper center console back in. I got to looking at the Mickey Mouse job HoseB did by putting in the manual transmission console from an '87, and decided it wasn't worth having in there. Then I put in my blue console that goes around the transfer case shifter that I got from the JY...looks spiffy with the grey next to the blue.

I should show you the bouncy seat that was in the truck when I got it. Apparently it had broken at some point, and somebody tried welding parts of it using big nuts as spacers in the sliding track channel. This caused the base to be able to lean side-to-side while I was driving. Not too cool. The JY piece is much better.

John B.