I got the paint from www.milspray.com. It's a "classic military vehicle restoration paint". It is a single stage water dispersable polyurethane CARC paint, low voc, which is why I bought it, though it was a bit pricey, and 2qts can cover an entire 2dr, so I have about 2qts left out of a gallon, which I'll probably need to touch up spots after I scratch/dent it. It was extremely easy to spray, right out of the can, no thinning, mixing, etc. I used a regular gun I picked up at harbor freight for $15, though they do reccommend an hvlp gun, but it worked fine without, though it is 2 coats of paint on top of 2 coats of primer. The black is just rattle can semi-flat black. I didn't have any bedliner left after spraying the entire interior. For that I used dupicolor bedliner kit (regular not kevlar) and sprayed it on using a paint sprayer for spraying popcorn textured ceilings, which I borrowed but you can get them at harbor freight for $25. It worked great because it gave the texture with it, didn't clog the nozzle once, though it obviously can only spray textured. For the guy that asked, my Raider has a 3" body lift, from roger brown, stock springs, tbars cranked (if you can't tell by my camber), 35x12.5 dunlop mudrovers and one mud king on pro comp rockcrawler 15x8 steel wheels w/ 3.75" backspacing, no rub