Locking Rear End From 94 SR

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Locking Rear End From 94 SR #1002321 07/06/10 03:35 PM

Joined: Apr 2010

Posts: 137

Lodi, Ca

Cambo

Wheeler

I have a locking 9.5" rear end from a 94 SR I am looking to sell. It comes with the driveshaft, trailing arms and the air compressor. It is missing two wheel studs on one side and it is the bigger u-joint version, which is why I have the extra driveshaft. All this for 150 OBO Local pick up only.
Thanks

1990 Montero LWB 3.0
Lodi, Ca. USA

Entire Thread
Subject	Posted By	Posted
Locking Rear End From 94 SR	Cambo	07/06/10 03:35 PM
Re: Locking Rear End From 94 SR	hazy_daze	07/06/10 03:45 PM
Re: Locking Rear End From 94 SR	JohnnyBfromPeoria	07/06/10 03:54 PM
Re: Locking Rear End From 94 SR	Cambo	07/06/10 06:17 PM
Re: Locking Rear End From 94 SR	JohnnyBfromPeoria	07/06/10 07:48 PM
Re: Locking Rear End From 94 SR	Cambo	07/06/10 08:21 PM
Re: Locking Rear End From 94 SR	JohnnyBfromPeoria	07/07/10 12:00 AM

Moderated by 4x4Wire, code33, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.475s Queries: 15 (3.473s) Memory: 0.6066 MB (Peak: 0.6395 MB) Data Comp: Off Server Time: 2026-06-23 15:34:35 UTC
Valid HTML 5 and Valid CSS