PM'ed you back finally.

For everyone else:
I had to extend the A-pillar bracket by an inch or so to reach the windshield trim. The glass doesn't quite go to the edge of the trim. I remember I 'ticked' the edge of it, but no issues with the glass because of it...the glass has plenty of issues, but not from the install.

I then found it easiest to make a new airbox "feed horn" out of a couple of short sections of pvc and a 90 and found some wire-reinforced hydraulic line with an inner diameter that matched the inner diameter of the ARB supplied piece and the outer diameter of the pvc and made pvc couplings to mate it all together, sealed it all up with gobs of permatex, zip ties and hose clamps and went swimming. <img src="/forums/images/graemlins/notooth.gif" alt="" />