A/C psi range for Gen III

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

A/C psi range for Gen III #1003716 07/20/10 04:49 PM

Joined: Apr 2010

Posts: 99

California

Inyo_man

Getting the Wheeling Fever

Is the psi range for the "low", suction tube 17-20?
My Gen III needs a recharge.
Is it a must to check the "high" psi? The charge kit only comes with a gauge for the suction tube.

'02 Montero: OME suspension, ARB front bumper, homemade skid plates & spare tire Blitz can mount, extended diff. breather, K&N air filter, Optima Yellow Top, BajaRack, IPF lights, Goodyear Duratrac 265/75/16's, RUD 4x4 Grip chains

Entire Thread
Subject	Posted By	Posted
A/C psi range for Gen III	Inyo_man	07/20/10 04:49 PM
Re: A/C psi range for Gen III	fasteddy	07/20/10 05:36 PM
Re: A/C psi range for Gen III	mxmikie	07/20/10 06:45 PM
Re: A/C psi range for Gen III	pcc	07/20/10 07:34 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.829s Queries: 15 (3.827s) Memory: 0.5969 MB (Peak: 0.6299 MB) Data Comp: Off Server Time: 2026-06-10 12:30:12 UTC
Valid HTML 5 and Valid CSS