Anyone used a Speedi-Sleeve on Transmission Input Shaft?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Anyone used a Speedi-Sleeve on Transmission Input Shaft? [Re: yodta] #1003817 08/02/10 08:31 AM

Joined: May 2009

Posts: 177

Woodland, Ca.

Ralph

Wheeler

I used one on an Tranny out put shaft.
It stopped leaking.

Ralph

1991 Toyota 4x4 Standard Cab Pickup.
engnbldr cam and head.
Doug Thorley Headers
Home Made Cat Backs
30x9.5x15 BF Goodrich All-Terrain M/T KM2

Entire Thread
Subject	Posted By	Posted
Anyone used a Speedi-Sleeve on Transmission Input Shaft?	yodta	07/21/10 04:19 PM
Re: Anyone used a Speedi-Sleeve on Transmission Input Shaft?	kewlynx	07/22/10 01:15 AM
Re: Anyone used a Speedi-Sleeve on Transmission Input Shaft?	yodta	07/22/10 02:22 AM
Re: Anyone used a Speedi-Sleeve on Transmission Input Shaft?	flyingbrass	08/01/10 02:33 AM
Re: Anyone used a Speedi-Sleeve on Transmission Input Shaft?	yodta	08/01/10 04:48 AM
Re: Anyone used a Speedi-Sleeve on Transmission Input Shaft?	Ralph	08/02/10 08:31 AM
Re: Anyone used a Speedi-Sleeve on Transmission Input Shaft?	yodta	08/02/10 11:55 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.511s Queries: 16 (3.508s) Memory: 0.6053 MB (Peak: 0.6383 MB) Data Comp: Off Server Time: 2026-06-23 05:56:29 UTC
Valid HTML 5 and Valid CSS