IIWY, I'd clean up the solder pads using soldering wick and verify, nothing else is messed up or discolored too badly on that board. <img src="/forums/images/graemlins/kewl.gif" alt="" />

Another thing to also check is what other components on that board might go bad that in turn could fry that part?

Off Roader
98 Montero with the Winter Package
89 Montero minty clean and reserved for overlanding trips or Cars and Coffee events
96SR (3.15:1 xcase, 35's) gone to the rust gods
96SR Build Up Thread
Old web page
Old web page