Quote
ECU shows no codes, the needle wont even move, its dead. Opened and has a cap that bursted, and boy does that thing stink, so 99% sure its a ECU problem.


Immediately remove that capacitor and any residual fluid from the board. The fluid is corrosive (an acid) & will eat the solder runs & circuit board if you don't. I'd do this immediately if I were you. <img src="/forums/images/graemlins/cheers.gif" alt="" />

Off Roader
98 Montero with the Winter Package
89 Montero minty clean and reserved for overlanding trips or Cars and Coffee events
96SR (3.15:1 xcase, 35's) gone to the rust gods
96SR Build Up Thread
Old web page
Old web page