Carb rebuild

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Carb rebuild #1004719 07/30/10 12:37 AM

Joined: Mar 2008

Posts: 59

Auburn, CA

From_jeep_to_raider Offline

Getting the Wheeling Fever

Hi guys,

I know I have seen the name on here before. I need to know who everyone uses to rebuild their carb's. I could swear it was JW something, but I can't seem to find it. Also, does anyone know what they charge? One other thing, I am having an issue with low oil pressure at idle. I just cleaned out the oil pick up and it helped alot. Is this typical of the 2.6 Dodge raider? It is reading in the 1/4 pressure area. Thank you.

Entire Thread
Subject	Posted By	Posted
Carb rebuild	From_jeep_to_raider	07/30/10 12:37 AM
Re: Carb rebuild	cjsmontero	07/30/10 01:49 AM
Re: Carb rebuild	fasteddy	07/30/10 02:03 AM
Re: Carb rebuild	From_jeep_to_raider	07/30/10 02:44 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.978s Queries: 15 (3.971s) Memory: 0.5990 MB (Peak: 0.6320 MB) Data Comp: Off Server Time: 2026-06-23 00:32:33 UTC
Valid HTML 5 and Valid CSS