Parts suppliers - L049G rear Discs

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Parts suppliers - L049G rear Discs [Re: bill_bly_ca] #1004793 08/17/10 07:19 AM

Joined: Jan 2005

Posts: 1,538

Red Deer, Alberta

torquemonster Offline

Body Damage is Cool

ever thought about just machining the rotors??? the rears are solid and have lots of meat to them where you should be able to machine them a few times before getting them too thin. and it will only cost about $30. makes them just as good as new, nice new clean flat surface.

Entire Thread
Subject	Posted By	Posted
Parts suppliers - L049G rear Discs	bill_bly_ca	07/30/10 02:17 PM
Re: Parts suppliers - L049G rear Discs	hazy_daze	07/31/10 12:58 AM
Re: Parts suppliers - L049G rear Discs	bill_bly_ca	08/23/10 04:42 PM
Re: Parts suppliers - L049G rear Discs	PHIL_	07/31/10 04:22 PM
Re: Parts suppliers - L049G rear Discs	Glock24	07/31/10 05:53 PM
Re: Parts suppliers - L049G rear Discs	Spider	08/01/10 06:33 AM
Re: Parts suppliers - L049G rear Discs	bill_bly_ca	08/16/10 09:05 PM
Re: Parts suppliers - L049G rear Discs	torquemonster	08/17/10 07:19 AM
Re: Parts suppliers - L049G rear Discs	bill_bly_ca	08/23/10 04:38 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.379s Queries: 16 (3.377s) Memory: 0.6095 MB (Peak: 0.6425 MB) Data Comp: Off Server Time: 2026-05-26 11:24:29 UTC
Valid HTML 5 and Valid CSS