Adapter Machining Questions

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Adapter Machining Questions #1004964 08/02/10 03:33 AM

Joined: Jul 2010

Posts: 29

Concord,NC

evileric

Getting the Wheeling Fever

Im finishing my Machining Associates Degree, and currently work in a machine shop for a Freightliner parts distributor. Im new to the Mitsu game, even though i have 4 now. What kind of brackets or adapters would the community use/buy? For transmission and/or transfer case. Different combos and what material would it need to be? Let me know.

1995 Montero SR factory air locker,33x12.50x15 At's

Entire Thread
Subject	Posted By	Posted
Adapter Machining Questions	evileric	08/02/10 03:33 AM
Re: Adapter Machining Questions	monte	08/02/10 05:14 AM
Re: Adapter Machining Questions	ryany	08/02/10 05:26 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.531s Queries: 15 (3.529s) Memory: 0.5967 MB (Peak: 0.6297 MB) Data Comp: Off Server Time: 2026-06-23 15:40:51 UTC
Valid HTML 5 and Valid CSS