|
|
|
|
 Re: New heads or JDM or Used engine?
[Re: fasteddy]
#1005220
08/06/10 01:32 AM
|
Joined: Aug 2009
Posts: 989
Rock Warrior
|
At this point in time "I" would not go JDM do to the "Time frame" ... The more time goes by the less and the bottom of the barrel of a JDM you will get .. And the v6 motors start to smoke as miles and time get on them so used and JDM are a crap shoot on having to mess with the heads on the "new" used motor any how
Did you do a compression test on the motor before you pulled the heads ..?... I allways do .. It can be low on the cylinders that have cracks or blown head gasket ... But it really helps to see where your at ... Sorry on the DOA on the Monty ...
The V6 heads dont really crack like the 2.6 most of the time .. Did you get her real hot ..Have the heads "greyed"...?
Hope your days get better
David
Hazardous Toys inc
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.477s Queries: 16 (3.475s) Memory: 0.6043 MB (Peak: 0.6372 MB) Data Comp: Off Server Time: 2026-06-05 12:11:56 UTCValid HTML 5 and Valid CSS 
