Consensus says... Yes I am an idiot. <img src="/forums/images/graemlins/drunk.gif" alt="" />

I am kidding of course and I definitely appreciate the feedback.
Haztoys, both corners seemed to feel good last night, but it's very possible I was too tired to think clearly.

Ryan, I did grease the rails very well because it was the only way to get them to move far enough to fit with the new rotors. The old ones were BAD. Maybe I should bring them to show next weekend. The brake move much cleaner now so that ladders one choice...

Frank, I only changed the front brakes so far... Somehow the rears weren't nearly as bad as the fronts. I am betting at this point the axel nuts are too tight. Unfortunately I has to go in a little trip to my daughters' recital and I will have to drive it home again (about 15 miles round trip). Hopefully that does not damage them. On the drive over, it did feel like it loosened a little, but at higher speeds, there was a bit more noise than normal. No squealing or grinding, but just an... I don't know how to describe, an industrial spinning noise. I don't have a fish scale or anything like one, but I should be fine loosening just to before the point where there is any play right?