Quote
Russ, Good find! The rep finally got back to me. Here is what he said about these bars:

'82-'89 Montero/Raider (D26mm x L50.38") = P/N SWA1726
'90 - '94 Montero (D27.5mm x L53.80") = P/N SWA1737
'95 - Today Montero (D27.5mm x 51.40") = P/N SWA1739

They are out of the 1726, and the 1737 is the only set with the deal since they are discontinued.


They're a bit off with these p/n's & years.
All gen I's tb's had the same torsion bar part numbers ('til 91).
All gen II's 3.0L's tb's had the same part numbers until 95.
All gen II's tb's after 95 had the same part numbers regardless of the engine size.

Using our VIN number repository & the Mitsu ASA program, here are the mitsu part numbers for the oem torsion bars...

GEN I BARS (manual or auto tranny)
88 2.6: MB176525 left bar; MB176526 rt bar
89 3.0: MB176525 left bar; MB176526 rt bar
91 3.0: MB176525 left bar; MB176526 rt bar

GEN II BARS (manual or auto tranny)
92 SR: MB633892 left bar; MB633893 rt bar
93 LS: MB633892 left bar; MB633893 rt bar
94 LS: MB633892 left bar; MB633893 rt bar
94 SR: MB932017 left bar; MB932018 rt bar
95 LS: MB633892 left bar; MB633893 rt bar
95 SR: MB932017 left bar; MB932018 rt bar
96 LS: MB932017 left bar; MB932018 rt bar
96 SR: MB932017 left bar; MB932018 rt bar
97 LS: MB932017 left bar; MB932018 rt bar
97 SR: MB932017 left bar; MB932018 rt bar
98: MB932017 left bar; MB932018 rt bar
99: MB932017 left bar; MB932018 rt bar

Off Roader
98 Montero with the Winter Package
89 Montero minty clean and reserved for overlanding trips or Cars and Coffee events
96SR (3.15:1 xcase, 35's) gone to the rust gods
96SR Build Up Thread
Old web page
Old web page