No Joy on Gen1 OD

Print Thread

Rate Thread

Re: No Joy on Gen1 OD [Re: fasteddy] #1005983 08/14/10 01:16 AM

Joined: Jun 2010

Posts: 33

I have NO idea

SeerAtlas

Getting the Wheeling Fever

wrapped a wire around the spade end, replaced the single wire over the top of it and grounded the wire FE. My understanding is that THAT *should* remove the therm switch from the equation.

seer

89LS,90LS,91LS,91LS,95SR,89JeepGrandWagoneer,90JGW,91JGW,92JGW,93RangeRoverLWB,93RRLWB,94RRLWB,94RRLWB,95RRSWB; 90'Dodgezilla' 1-Ton Cummins4x4.

Entire Thread
Subject	Posted By	Posted
No Joy on Gen1 OD	SeerAtlas	08/13/10 11:05 PM
Re: No Joy on Gen1 OD	FrankR	08/13/10 11:42 PM
Re: No Joy on Gen1 OD	fasteddy	08/14/10 12:00 AM
Re: No Joy on Gen1 OD	SeerAtlas	08/14/10 01:16 AM
Re: No Joy on Gen1 OD	SeerAtlas	08/14/10 01:19 AM
Re: No Joy on Gen1 OD	FrankR	08/14/10 11:31 AM
Re: No Joy on Gen1 OD	SeerAtlas	08/14/10 04:45 PM
Re: No Joy on Gen1 OD	FrankR	08/14/10 06:02 PM
Re: No Joy on Gen1 OD	Va_Stumpy	08/14/10 12:06 AM
Re: No Joy on Gen1 OD	mxmikie	08/14/10 12:12 AM
Re: No Joy on Gen1 OD	SeerAtlas	08/14/10 01:24 AM
Re: No Joy on Gen1 OD	fasteddy	08/14/10 01:49 AM
Re: No Joy on Gen1 OD	SeerAtlas	08/14/10 07:08 PM
Re: No Joy on Gen1 OD	fasteddy	08/14/10 07:41 PM
Re: No Joy on Gen1 OD	SeerAtlas	08/14/10 10:39 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: