no wires but ignition coil rail, new, plugs are new too.

What I am thinking is the timing of the spark sent by computer is wrong.

Also, when i attachd a compression gauge, cylinder 1 would get approx 25 psi when the alignment point on the damper was maybe 30 degrees off (not too much, but it was easily seen)

backfire or misfire? well, before we had fire coming out of the throttle body, now we just get a lot of gassy pops from the throttle body, but we did unhook a lot of things (sepentine belt is off, and all attachments)

like 2 weeks ago, it would start and die within 10-15 seconds, but then there was a loud bang and hasnt started since