Quote
ok cool. thank you for the help. i was also planning on running a ground wire from the bed to the frame with self tapping screws. i dont see how it would hurt so might as well.

Make sure you sand everything down and coat with dielectric grease so they dont rust/corrosde.

89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim