|
|
|
|
Newbie with Tire & Wheel fit on Gen 1 question
#1006610
08/20/10 03:21 PM
|
Joined: Aug 2010
Posts: 3
OP
Need a Spot
|
Introduction and question
I have a new to me 89 Dodge Raider with the 3.0 V6 - Auto - A/C (works) - PW (wish they were crank up)- Cruise - I guess it was loaded back in the day Just got it 2 weeks ago and have been busy just piddling around with it. Had the seats redone - Replaced all the door panels and flat interior pieces with alum diamond plate - Removed carpet - removed all the "tar" on the floors (PITA)(getting ready for bedliner treatment) Luckily found a donor truck at the local "Pull-A-Part" Replaced Hood Replaced L/F fender Fixed-Replaced-Changed lots of little stuff
Still got a long way to go - She leaks oil from everywhere (thats next on the list)
I am sure this has been addressed 1000 times on here but I was unable to find it.
I want to run as big a tire as possible with no lift & no T bar crank.
My thought is 33/1050/15 on a 15 X 8 wheel with 3 1/2" back space.
Any and all advic [color:"blue"] [/color] e is appreciated
Thanks- Chris
89 Raider V6-Auto-Air PS-PB-PW-Cruise 215,000 Miles and counting
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.527s Queries: 15 (3.525s) Memory: 0.5953 MB (Peak: 0.6283 MB) Data Comp: Off Server Time: 2026-06-11 01:38:40 UTCValid HTML 5 and Valid CSS