Actually we tested it in 3rd and and 4th gear, high range.

The only chart I have with the A/F ratio was in low range.

I'm trying to figure out how to post all the info so it should becoming soon.

The Tech ran 3rd gear first because said" these engines usually don't have enough power to do a good 4th gear run.

I asked him at the end to do the low range test.

Peak torque in 4th was 123.4 @ 3417rpm
Max HP was 93.9 @ 4310 rpm.

The best thing is how flat the torque curve with
110 ft.lbs at just over 2000rpm.

Things start to fall off over 4100 rpm, which is fine.
It's what I had in mind when I was buying parts from EB.

I have lugged it down so you could hear each cylinder fire.
Like my brothers old army Jeep use to run <img src="/forums/images/graemlins/pfft.gif" alt="" />