|
|
|
|
 Any source on new exhaust manifolds for the 2.6l?
#1007694
09/03/10 05:13 PM
|
Joined: May 2009
Posts: 306
OP
Mudrunner
|
I'm in need of one for a late 2.6l (the one without the cat-converter inside it) for my buddy's Gen 1. Are they stil available at the dealer?
|
|
|
Re: Any source on new exhaust manifolds for the 2.6l?
[Re: MartySoCal]
#1007695
09/03/10 05:23 PM
|
Joined: Feb 2006
Posts: 85
Getting the Wheeling Fever
|
They might, the part number is MD110720. I think I still have one from my 87 if you want it, just charge you for shipping.
87 Monty SWB 208k currently immobile: SOME RUST
89 Quest 61k slightly original
DD---> Integra Rust bucket (gone but not forgotten)
02 BMW M5
|
|
|
Re: Any source on new exhaust manifolds for the 2.6l?
[Re: Jimbotsi]
#1007696
09/03/10 07:26 PM
|
Joined: May 2009
Posts: 306
OP
Mudrunner
|
Thanks for the quick reply, Jimbotsi!
I'd really like to find a new one. I searched the Mitsu # and found that ATP (The automatic transmission parts company) has one listed in their catalog! The part # is 101150.
A couple local sources show it with wholesale prices (for the shop I work at) ranging from $130-$200, but no local stock. They have to get back to me to verify it's still available. I'll get back to you in a "PM" if I decide to go "good used"!
|
|
|
Re: Any source on new exhaust manifolds for the 2.6l?
[Re: MartySoCal]
#1007697
09/03/10 11:07 PM
|
Joined: Jan 2001
Posts: 13,649
Web Wheeler
|
Whichever you buy, I recommend cutting the inter-port casting webs to isolate each runner, and if you do it on a used one, have the gasket surface refaced.
Not responsible for advice not taken...
|
|
|
Re: Any source on new exhaust manifolds for the 2.6l?
[Re: fasteddy]
#1007698
09/03/10 11:59 PM
|
Joined: Dec 2007
Posts: 2,348
Body Damage is Cool
|
eddy, why do you say to cut it? Mine is in great shape, but something I have noticed is that it still has the factory brace on the headpipe. I've looked at a few, both running and in jyards, and I've noticed that those weren't attached, especially noticible on one I found running wqith a cracked manifold. With mine still having the brace, you think I should take and get that machining done? Opinions please!!!!
|
|
|
Re: Any source on new exhaust manifolds for the 2.6l?
[Re: fasteddy]
#1007699
09/04/10 03:35 AM
|
Joined: Dec 2006
Posts: 445
Mudrunner
|
I'm not sold on it/ I've ran both manifolds with cut and uncut webs. I had a cut web manifold warp so bad on my I had to take a few prybars to get it off the studs, Ruined the studs to say the least.
8 Starion SHP, 87 mitsubishi van, , 81 galant g54bt, 78 lancer g54bt, 1965 Mitsubishi Debonair Deluxe
87 swb montero offroad pkg goin g54bt with sr locker 33x12.5 dual bouncy.
|
|
|
|
|
|
