Question about rims

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Question about rims #1008018 09/07/10 07:20 PM

Joined: May 2010

Posts: 67

Northern, CA

monty84

Getting the Wheeling Fever

Must the surface of the back of the rim that will be sitting on the hub of the wheel be flat? What if there is a slight bevel? Will there be any problems?

'84 Monty SWB, 2.6 Manual, rear LSD, bOuNcY, cranked T Bars, 33x12.5 M/T's

Entire Thread
Subject	Posted By	Posted
Question about rims	monty84	09/07/10 07:20 PM
Re: Question about rims	Mudraider	09/07/10 10:21 PM
Re: Question about rims	monty84	09/08/10 12:07 AM
Re: Question about rims	FrankR	09/08/10 12:28 AM
Re: Question about rims	monty84	09/08/10 01:53 AM
Re: Question about rims	rxinhed	09/08/10 05:32 AM
Re: Question about rims	monty84	09/08/10 06:56 AM
Re: Question about rims	rxinhed	09/09/10 02:51 AM
Re: Question about rims	fasteddy	09/09/10 03:23 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.714s Queries: 15 (3.711s) Memory: 0.6108 MB (Peak: 0.6438 MB) Data Comp: Off Server Time: 2026-06-11 14:34:41 UTC
Valid HTML 5 and Valid CSS