Question about rims

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Question about rims [Re: FrankR] #1008022 09/08/10 01:53 AM

Joined: May 2010

Posts: 67

Northern, CA

monty84

Getting the Wheeling Fever

Ok i talked to a buddy of mine,and he said that solid cast aluminum will be flat, but steel wheels will felx slighty in and make flat contact on the hub.. The wheels im looking at are steel and the wheels i have now are aluminum, so it makes sense to me. Thanks for the help.

'84 Monty SWB, 2.6 Manual, rear LSD, bOuNcY, cranked T Bars, 33x12.5 M/T's

Entire Thread
Subject	Posted By	Posted
Question about rims	monty84	09/07/10 07:20 PM
Re: Question about rims	Mudraider	09/07/10 10:21 PM
Re: Question about rims	monty84	09/08/10 12:07 AM
Re: Question about rims	FrankR	09/08/10 12:28 AM
Re: Question about rims	monty84	09/08/10 01:53 AM
Re: Question about rims	rxinhed	09/08/10 05:32 AM
Re: Question about rims	monty84	09/08/10 06:56 AM
Re: Question about rims	rxinhed	09/09/10 02:51 AM
Re: Question about rims	fasteddy	09/09/10 03:23 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.520s Queries: 16 (3.518s) Memory: 0.6098 MB (Peak: 0.6427 MB) Data Comp: Off Server Time: 2026-06-10 16:14:05 UTC
Valid HTML 5 and Valid CSS