Need Major Help Quick

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Need Major Help Quick [Re: matts] #1008074 09/09/10 02:28 AM

Joined: Jun 2010

Posts: 70

N.C.

Brimt

Getting the Wheeling Fever

Yeah thats what i made sure of both times when i replaced the entire tc set. Everywhere i read said that the tensioner bolts were only supposed to be torqued to 12 ft. lbs. bc if they were overtightened then it could cause the plunger in the tensioner to stick.

Big T

Entire Thread
Subject	Posted By	Posted
Need Major Help Quick	Brimt	09/08/10 03:37 AM
Re: Need Major Help Quick	OOP'S	09/08/10 04:10 AM
Re: Need Major Help Quick	Brimt	09/08/10 04:13 AM
Re: Need Major Help Quick	kewlynx	09/08/10 04:16 AM
Re: Need Major Help Quick	Brimt	09/08/10 04:18 AM
Re: Need Major Help Quick	RatLabGuy	09/08/10 04:18 PM
Re: Need Major Help Quick	Brimt	09/08/10 04:24 PM
Re: Need Major Help Quick	Greg_Canada	09/08/10 06:56 PM
Re: Need Major Help Quick	Brimt	09/08/10 07:30 PM
Re: Need Major Help Quick	matts	09/09/10 01:37 AM
Re: Need Major Help Quick	Brimt	09/09/10 02:28 AM
Re: Need Major Help Quick	eastcoast	09/10/10 07:32 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.453s Queries: 16 (3.450s) Memory: 0.6177 MB (Peak: 0.6507 MB) Data Comp: Off Server Time: 2026-06-14 17:10:58 UTC
Valid HTML 5 and Valid CSS