|
|
 Re: Really loud creaking noise from front end, Gen 1 Pajero.
[Re: fasteddy]
#1008564
09/14/10 12:04 AM
|
Joined: Feb 2004
Posts: 10,238
Web Wheeler
|
I bet there's not a gen1 out there with the prophylactic still on it... Mine has them intact. <img src="/forums/images/graemlins/smile.gif" alt="" /> They were missing when I bought the truck, but still available at the time from the dealer. A piece of vinyl or rubber tubing will do just as well. Frank
'89 [color:"white"]G-Raider[color:"white"] [color:"black"]Supercharged 3.0L, MegaSquirt 2, lockup A/T, 2.5" exhaust, 172k, Cibie H4s/Oscar SCs, Hella Micro DE fogs, Cobra CB, Superwinch hubs, LSD rear/Aussie Locker front, Bilsteins, Lifeline AGM, Rust-Oleum
|
|
|
Re: Really loud creaking noise from front end, Gen 1 Pajero.
[Re: FrankR]
#1008565
09/14/10 12:20 AM
|
Joined: Aug 2010
Posts: 36
OP
Getting the Wheeling Fever
|
A piece of vinyl or rubber tubing will do just as well.
Frank I was thinking chair leg ends. You know those little rubber or urethane caps that they put on to stop them marking or digging in to the floor. Figured I could pick some up at the local hardware store pretty cheap, they would need to be pretty hard though so they dont just rip apart first contact.
90 SWB 2.5 TDi Pajero, 31x10.5 BFG A/T on 15" Two Piece BERG rims, ARB steel bull bar, Narva Headlight Upgrade, Thule Racks and Basket.
|
|
|
Re: Really loud creaking noise from front end, Gen 1 Pajero.
[Re: FrankR]
#1008566
09/14/10 12:43 AM
|
Joined: Jan 2001
Posts: 13,649
Web Wheeler
|
I thought about putting on a rubber tube large enough to go over the whole post, and long enough to protrude 1/4" past the end, and fill that stub end with grease. And Frank, only you would bother... <img src="/forums/images/graemlins/smile.gif" alt="" />
Not responsible for advice not taken...
|
|
|
Re: Really loud creaking noise from front end, Gen 1 Pajero.
[Re: fasteddy]
#1008567
09/14/10 12:57 AM
|
Joined: May 2006
Posts: 524
Rock Warrior
|
|
89 3L V6 5spd SWB, Aisin Manual Hubs, 2 (suspension) seater Raider in Wheeler, OR
|
|
|
Re: Really loud creaking noise from front end, Gen 1 Pajero.
[Re: Bernoulli]
#1008568
09/14/10 03:25 AM
|
Joined: Jan 2001
Posts: 13,649
Web Wheeler
|
the need for prelubed Trojans is caused by a failure in preperatory technique... <img src="/forums/images/graemlins/smile.gif" alt="" />
Not responsible for advice not taken...
|
|
|
Re: Really loud creaking noise from front end, Gen 1 Pajero.
[Re: fasteddy]
#1008569
09/14/10 04:34 AM
|
Joined: Aug 2008
Posts: 530
Rock Warrior
|
I can't afford prophylactics, so I just use amateurs.
HUMMER .25: No need to compensate.
1989 Dodge Raider: 3.0/5
1992 Chrysler LeBaron Convertible: 3.0/A
1994 GMC Safari: 4.3/A
|
|
|
Re: Really loud creaking noise from front end, Gen 1 Pajero.
[Re: fasteddy]
#1008570
09/14/10 02:26 PM
|
Joined: May 2007
Posts: 4,628
Roll Me Over
|
And Frank, only you would bother... <img src="/forums/images/graemlins/smile.gif" alt="" /> Mine got new ones too... Just 'cause.
Fasteddy's advice is occasionally sound...
|
|
|
Re: Really loud creaking noise from front end, Gen 1 Pajero.
[Re: hazy_daze]
#1008571
09/14/10 05:34 PM
|
Joined: Jul 2009
Posts: 1,342
Body Damage is Cool
|
Can someone take a picture of what yall are talking about with the steering ends? i can not see anything wrong with mine at all but I have a terrible squeaking espically offroad making hard turns. i thought it was my sway bar.
91 Montero LS "Sandstorm", Auto, Dual Bouncy Seats, 2" Suspension lift, 2" Body Lift, GENII front IFS, 32" MT tires
89 Raider "Trailbreaker", 3.0, Auto, Dual Bouncy Seats
|
|
|
|
