motor mounts?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: motor mounts? [Re: RatLabGuy] #1008770 09/17/10 02:50 PM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

Quote

hm, cool, idea, thanks.
Isn't one side more prone to failure?

Yes, I think it is the driver's side that tends to get pulled too far up under load (usually an issue w/ dual cases). A simple chain works well to protect the rubber in the mounts:
- http://www.4crawler.com/4x4/CheapTricks/MotorMount.shtml

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
motor mounts?	RatLabGuy	09/16/10 07:10 PM
Re: motor mounts?	4Crawler	09/16/10 07:22 PM
Re: motor mounts?	RatLabGuy	09/16/10 10:59 PM
Re: motor mounts?	Greg_Canada	09/17/10 02:35 PM
Re: motor mounts?	4Crawler	09/17/10 02:50 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.581s Queries: 16 (3.579s) Memory: 0.6026 MB (Peak: 0.6356 MB) Data Comp: Off Server Time: 2026-06-17 12:45:03 UTC
Valid HTML 5 and Valid CSS