Back from the Machine Shop

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Back from the Machine Shop [Re: leadheavy52] #1008848 09/18/10 09:26 PM

Joined: Dec 2007

Posts: 2,348

Orange Park, FL

Mudraider

Body Damage is Cool

Where you storing this at? Reason I ask is the surface rust on it already. If it's gonna be a while Cosmoline or some other metal cover would be a good idea! You have a good support group out there of like minded guys.

Entire Thread
Subject	Posted By	Posted
Back from the Machine Shop	leadheavy52	09/17/10 10:49 PM
Re: Back from the Machine Shop	Mudraider	09/18/10 09:26 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.499s Queries: 16 (3.496s) Memory: 0.5944 MB (Peak: 0.6274 MB) Data Comp: Off Server Time: 2026-06-18 22:37:44 UTC
Valid HTML 5 and Valid CSS