Time to go to work!

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Time to go to work! [Re: BigJim] #1009210 09/21/10 01:23 PM

Joined: May 2009

Posts: 306

SoCal

MartySoCal Offline

Mudrunner

If memory serves me correctly, the bolts are 3/8" USS thread, 3" long should work with most pullers.

On the lighter, I was thinking you had a YJ, some TJ and other later model Jeeps lighters have little tangs that snap out once the lighter is inserted from the front, that retain it in a metal sleeve that goes in first.

Entire Thread
Subject	Posted By	Posted
Time to go to work!	BigJim	09/20/10 10:06 PM
Re: Time to go to work!	MartySoCal	09/21/10 01:23 PM
Re: Time to go to work!	BigJim	09/21/10 04:34 PM
Re: Time to go to work!	DBL_DTY97TJ	09/24/10 02:11 AM
Re: Time to go to work!	BigJim	09/24/10 02:49 AM
Re: Time to go to work!	BigJim	09/27/10 02:48 AM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 7.386s Queries: 16 (7.384s) Memory: 0.6019 MB (Peak: 0.6349 MB) Data Comp: Off Server Time: 2026-05-30 00:04:45 UTC
Valid HTML 5 and Valid CSS