Breaching the firewall

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Breaching the firewall [Re: 89IsMine] #1009217 09/20/10 11:14 PM

Joined: Dec 2007

Posts: 2,348

Orange Park, FL

Mudraider

Body Damage is Cool

Not much help to you since you have a manual with the clutch slave cylinder, but for us with the automatic, the round spot right by the brake master cylinder is normally where the clutch master cylinder goes. that is the perfect spot to run things thru the firewall. But like I said, that's for those with the automatics.

Entire Thread
Subject	Posted By	Posted
Breaching the firewall	89IsMine	09/20/10 10:22 PM
Re: Breaching the firewall	hazy_daze	09/20/10 10:51 PM
Re: Breaching the firewall	Mudraider	09/20/10 11:14 PM
Re: Breaching the firewall	fasteddy	09/20/10 11:45 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.516s Queries: 16 (3.514s) Memory: 0.5989 MB (Peak: 0.6318 MB) Data Comp: Off Server Time: 2026-06-05 20:03:34 UTC
Valid HTML 5 and Valid CSS