Input Shaft Bearing -- how much play is acceptable [video]

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Input Shaft Bearing -- how much play is acceptable [video] [Re: 4runner4ever] #1009248 10/03/10 10:50 PM

Joined: Apr 2005

Posts: 525

yodta

Rock Warrior

yeah, I thought about that, as well.

I was also surprised by the amount of play on newly replaced rear axle bearings about 10 years ago. I guess I always thought sealed cartridge bearings would be tighter than that.

msg - '87 xtracab

Entire Thread
Subject	Posted By	Posted
Input Shaft Bearing -- how much play is acceptable [video]	yodta	09/21/10 01:43 AM
Re: Input Shaft Bearing -- how much play is acceptable [video]	yodta	10/02/10 12:05 AM
Re: Input Shaft Bearing -- how much play is acceptable [video]	4runner4ever	10/03/10 10:21 PM
Re: Input Shaft Bearing -- how much play is acceptable [video]	yodta	10/03/10 10:50 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.646s Queries: 16 (3.643s) Memory: 0.5988 MB (Peak: 0.6318 MB) Data Comp: Off Server Time: 2026-07-15 10:07:37 UTC
Valid HTML 5 and Valid CSS