Help with wheel/axle seal?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Help with wheel/axle seal? [Re: Martini] #1009402 09/24/10 01:03 AM

Joined: Apr 2002

Posts: 3,568

Grass Valley, CA

Snowtoy

Roll Me Over

Toyota used the same IFS set-up from '86-'95(non-Tacoma) trucks, 4-Runners, and T100's, so they should work. You could double check with Toyota and ask to cross reference the numbers, but they should be the same.

More than tread lightly. Leave it like you were never there, nor anyone else.
'90 X-cab 4.88's 33 BFG AT's, rr ARB, Headers, Ignition upgrade, cold air induction.
'91 X-cab 5.29's 315's BFG MT's, rr ARB, custom bumper and flatbed

Entire Thread
Subject	Posted By	Posted
Help with wheel/axle seal?	Martini	09/23/10 02:26 PM
Re: Help with wheel/axle seal?	Snowtoy	09/24/10 01:03 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.516s Queries: 16 (3.514s) Memory: 0.5943 MB (Peak: 0.6272 MB) Data Comp: Off Server Time: 2026-06-12 09:33:04 UTC
Valid HTML 5 and Valid CSS