Gen 1 SAS help related tranfer case...

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Gen 1 SAS help related tranfer case... #1009494 09/25/10 01:20 PM

Joined: Dec 2008

Posts: 39

JorgeA

Getting the Wheeling Fever

Hello friends.. I am planing to reaplace the entire front suspension for a long arm type and I am looking a Dana 44 front differential which comes with the XJ or ZJ Jeep (Cherokee or Grand Cherokee) those differentials do not come with hubs, is there any trouble with the transfer that actualy have on my Gen 1 Montero 2 door??l. It is because in the actual set up, I have hubs... or should I look for a front differential with hubs?.

Thanks

JorgeA

Entire Thread
Subject	Posted By	Posted
Gen 1 SAS help related tranfer case...	JorgeA	09/25/10 01:20 PM
Re: Gen 1 SAS help related tranfer case...	RECON45	09/25/10 01:51 PM
Re: Gen 1 SAS help related tranfer case...	TOASTY	09/25/10 06:51 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.494s Queries: 15 (3.491s) Memory: 0.5990 MB (Peak: 0.6320 MB) Data Comp: Off Server Time: 2026-06-07 08:33:00 UTC
Valid HTML 5 and Valid CSS