Removing Body Lift

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Removing Body Lift [Re: BamZipPow] #1010725 10/15/10 01:19 AM

Joined: Sep 2007

Posts: 179

toyT100

Wheeler

Thanks for the links! Funny those showed up, I had already been looking there to start with!! In everyone's opioion which would look best, or would there even be a dif? I am switching to 33x10.50R15 BFG AT's. I have a 1.5" BJ spacer installed and dont know if I should drop down to a 1" BL or just stock height? Lemme know what you think (pics always help too!)

Entire Thread
Subject	Posted By	Posted
Removing Body Lift	toyT100	10/13/10 02:26 AM
Re: Removing Body Lift	Kookadala	10/13/10 05:32 PM
Re: Removing Body Lift	kewlynx	10/14/10 05:07 AM
Re: Removing Body Lift	BamZipPow	10/14/10 09:15 AM
Re: Removing Body Lift	toyT100	10/15/10 01:19 AM
Re: Removing Body Lift	kewlynx	10/15/10 01:37 AM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.557s Queries: 16 (3.554s) Memory: 0.6029 MB (Peak: 0.6359 MB) Data Comp: Off Server Time: 2026-06-16 15:10:08 UTC
Valid HTML 5 and Valid CSS