|
|
 parts/ exploded views?
#1011152
10/17/10 04:51 PM
|
Joined: Jul 2009
Posts: 305
OP
Mudrunner
|
I am looking for some part's diagrams online. Does anybody have any good references?
89 V6 manual trans Dodge Raider frame 87 cold weather pkg 2" body lift, Soft 8's wraped in BFG km2 33x10.5x15, JDM Pajero yellow Bosch fogs. Yackama basket. Duel bouncies gen II rear springs,gen II ft brakes,master and booster.
|
|
|
Re: parts/ exploded views?
[Re: bodyswapped8789]
#1011153
10/17/10 05:02 PM
|
Joined: Dec 2008
Posts: 659
Rock Warrior
|
|
'88 Raider. 2.6L dead...2.4L swap in progress, AT, 33's, 2 bouncy seat,AC, CC, 2.25 exh, 2" Tbar, 2" BL, rear DB, rear LSD,4.90's, SW hubs,gen2 uca's, KYB shocks, snorkel, elec fan, MSD.
'99 chev k3500 crewcab
'15 Subaru XV
'03 BMW i325
|
|
|
Re: parts/ exploded views?
[Re: zarktheshark]
#1011154
10/18/10 06:42 PM
|
Joined: Mar 2006
Posts: 749
Rock Warrior
|
X2 Download ASA - you'll have access to all the exploded diagrams you need plus a handy part number look-up utility. If you're fortuante to have unrestricted badnwidth, feel free to download the FSM's. Better diagrams, but no part number references except for specialty tools. Jim/MI-Mitsu
89 Montero LS 3.0L/Auto
90 MightyMax 2.4L/Man
Parted/gone - parts available!
89 Montero LS 3.0L/Auto [Blue/Blue] (2 of 2)
89 Conquest SHP
88 Conquest SHP
87 Dodge Raider 2.6L/Auto
91 Montero RS 3.0L/Auto
Others: 37 Lincoln
|
|
|
Re: parts/ exploded views?
[Re: MI_Mitsu]
#1011155
10/18/10 07:59 PM
|
Joined: Jul 2009
Posts: 305
OP
Mudrunner
|
|
89 V6 manual trans Dodge Raider frame 87 cold weather pkg 2" body lift, Soft 8's wraped in BFG km2 33x10.5x15, JDM Pajero yellow Bosch fogs. Yackama basket. Duel bouncies gen II rear springs,gen II ft brakes,master and booster.
|
|
|
Re: parts/ exploded views?
[Re: bodyswapped8789]
#1011156
04/14/11 10:49 PM
|
Joined: Jul 2009
Posts: 305
OP
Mudrunner
|
Now I'm looking for a exploded parts view for a 94 Montero, I got new UCA's and I need bushings for them. Does anybody have part numbers, or measurements? I was looking into Energy suspension bushings but I will need to get the measurements for the universal bushing that they make.
89 V6 manual trans Dodge Raider frame 87 cold weather pkg 2" body lift, Soft 8's wraped in BFG km2 33x10.5x15, JDM Pajero yellow Bosch fogs. Yackama basket. Duel bouncies gen II rear springs,gen II ft brakes,master and booster.
|
|
|
Re: parts/ exploded views?
[Re: bodyswapped8789]
#1011157
04/14/11 11:08 PM
|
Joined: Jan 2000
Posts: 16,227
Web Wheeler
|
Now I'm looking for a exploded parts view for a 94 Montero, I got new UCA's and I need bushings for them. Does anybody have part numbers, or measurements? I was looking into Energy suspension bushings but I will need to get the measurements for the universal bushing that they make. Did you check the ASA program?
|
|
|
Re: parts/ exploded views?
[Re: bodyswapped8789]
#1011158
04/15/11 01:26 AM
|
Joined: Jun 2002
Posts: 6,211
Trail Leader
|
I didn't look too hard, but I was unable to locate upper control arm bushings for my '95. I bought complete arms with ball joints and bushings installed on the shafts already. They were from some company on EBay located in Florida. The end nuts on the shaft like to come loose, even though I loc-tited them and tightened the heck out of them. I'd do it all again with genuine Mitsu parts, even though the cost is X2.
John B.
'87 Raider 2.6 Turbo Auto, Under Construction
'95 Montero SR, 35x12.5/15 BFG M/T KM-2's, Rock sliders, Qtr panel chop, gas tank lift, 2" BL, Aisins, 5.29s
'95 Pajero Mini
'98 Montero Winter Ed.
'04 Cadillac XLR
'03 Kawasaki ZRX1200R
'60 Ford Falcon 4Dr
|
|
|
Re: parts/ exploded views?
[Re: JohnnyBfromPeoria]
#1011159
04/15/11 05:57 AM
|
Joined: Feb 2005
Posts: 1,511
Body Damage is Cool
|
X2 on Johnny's post. I recently replaced my entire upper control arms after a long & fruitless search for replacement bushings. The Mitsu arms were pricey, but they should last the same 200k miles as my originals did.
95 Montero SR
3.8 MIVEC, Advance headers, 2 1/2" exhaust, Magnaflow muffler, OME shocks & rear springs, 2" body lift, 3" tank lift, 4.90s, TRE front locker, factory rear locker, Roger Brown Rock Sliderz, 315/75r16 (35") tires, Sport big brakes
|
|
|
Re: parts/ exploded views?
[Re: off-roader]
#1011160
04/15/11 09:49 PM
|
Joined: Jul 2009
Posts: 305
OP
Mudrunner
|
Now I'm looking for a exploded parts view for a 94 Montero, I got new UCA's and I need bushings for them. Does anybody have part numbers, or measurements? I was looking into Energy suspension bushings but I will need to get the measurements for the universal bushing that they make. Did you check the ASA program? I searched that and when I clicked on the link and it says "not found" on all four links. The UCA that I have are OEM from a yard, I cleaned them up and powder coated them now I'm putting them back together. I guess it's not that big of a deal I could just get OEM bushings too? IDK. I just thought I would look for urethane instead of rubber. Do you guys think it worth it?
89 V6 manual trans Dodge Raider frame 87 cold weather pkg 2" body lift, Soft 8's wraped in BFG km2 33x10.5x15, JDM Pajero yellow Bosch fogs. Yackama basket. Duel bouncies gen II rear springs,gen II ft brakes,master and booster.
|
|
|
Re: parts/ exploded views?
[Re: bodyswapped8789]
#1011161
04/15/11 10:14 PM
|
Joined: Feb 2005
Posts: 1,511
Body Damage is Cool
|
Are you looking for Gen I or Gen II UCA bushings? You can't get separate bushings for the Gen II arms (at least, I wasn't able to find any - either rubber or urethane), you have to buy the entire UCA. I think they are available for Gen I's though.
95 Montero SR
3.8 MIVEC, Advance headers, 2 1/2" exhaust, Magnaflow muffler, OME shocks & rear springs, 2" body lift, 3" tank lift, 4.90s, TRE front locker, factory rear locker, Roger Brown Rock Sliderz, 315/75r16 (35") tires, Sport big brakes
|
|
|
|
