Installing hitch and wiring for towing

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Installing hitch and wiring for towing [Re: outdoorfan] #1011170 10/19/10 12:51 AM

Joined: Jan 2003

Posts: 1,355

Three Oaks, MI

Elbow_Greese Offline

Body Damage is Cool

I have a class 3 on mine, got it from JC Whitney I think.
Bolts right up (have to remove the bumper, then bolt it and the bumper together in the same holes).

Todd

1986 Pickup extracab longbed "Woody edition"
SAS - 33's, 5.29's, lockright rear.

02 IS300 SportCross - my "DD"
94 2wd v6 extracab
04 Outback Wagon- wife's/family car

Entire Thread
Subject	Posted By	Posted
Installing hitch and wiring for towing	outdoorfan	10/17/10 11:31 PM
Re: Installing hitch and wiring for towing	Pyroboy	10/17/10 11:38 PM
Re: Installing hitch and wiring for towing	outdoorfan	10/18/10 01:08 AM
Re: Installing hitch and wiring for towing	Elbow_Greese	10/19/10 12:51 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.532s Queries: 16 (3.530s) Memory: 0.5991 MB (Peak: 0.6321 MB) Data Comp: Off Server Time: 2026-06-13 14:08:48 UTC
Valid HTML 5 and Valid CSS