Well, here we go again (Blown HG)!!

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Well, here we go again (Blown HG)!! [Re: outdoorfan] #1011172 10/18/10 07:33 AM

Joined: Nov 1999

Posts: 1,049

Pasadena, CA. USA

toyrunner

Body Damage is Cool

What did you torque the HG down to? I always go 65-68 ft-lbs.
Seems to hold better.
What gasket did you use? I presume it was a new head? Did you clean the block deck thoroughly?
Some hold longer than others, it seems <img src="/forums/images/graemlins/shiner.gif" alt="" />

Last edited by toyrunner; 10/18/10 07:33 AM.

1985 SR5 4Runner
eLocked with Carter Lock
4.7:1 single case
Davez Offroad twin stick

Entire Thread
Subject	Posted By	Posted
Well, here we go again (Blown HG)!!	outdoorfan	10/18/10 01:39 AM
Re: Well, here we go again (Blown HG)!!	toyrunner	10/18/10 07:33 AM
Re: Well, here we go again (Blown HG)!!	outdoorfan	10/18/10 02:00 PM
Re: Well, here we go again (Blown HG)!!	yodta	10/19/10 04:44 AM
Re: Well, here we go again (Blown HG)!!	outdoorfan	10/19/10 04:22 PM
Re: Well, here we go again (Blown HG)!!	toyrunner	10/19/10 07:17 PM
Re: Well, here we go again (Blown HG)!!	outdoorfan	10/19/10 10:00 PM
Re: Well, here we go again (Blown HG)!!	engnbldr	10/19/10 10:24 PM
Re: Well, here we go again (Blown HG)!!	yodta	10/21/10 03:06 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social: