Well, here we go again (Blown HG)!!

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Well, here we go again (Blown HG)!! [Re: toyrunner] #1011177 10/19/10 10:00 PM

Joined: Oct 2007

Posts: 212

outdoorfan Offline

Wheeler

Quote

Most definitely clean out the head stud/bolt holes and blow out with compressed air. I run a thread chaser through them to final clean. It will make the world of a difference.
Good luck.

Yep, I did that. Thanks.

Entire Thread
Subject	Posted By	Posted
Well, here we go again (Blown HG)!!	outdoorfan	10/18/10 01:39 AM
Re: Well, here we go again (Blown HG)!!	toyrunner	10/18/10 07:33 AM
Re: Well, here we go again (Blown HG)!!	outdoorfan	10/18/10 02:00 PM
Re: Well, here we go again (Blown HG)!!	yodta	10/19/10 04:44 AM
Re: Well, here we go again (Blown HG)!!	outdoorfan	10/19/10 04:22 PM
Re: Well, here we go again (Blown HG)!!	toyrunner	10/19/10 07:17 PM
Re: Well, here we go again (Blown HG)!!	outdoorfan	10/19/10 10:00 PM
Re: Well, here we go again (Blown HG)!!	engnbldr	10/19/10 10:24 PM
Re: Well, here we go again (Blown HG)!!	yodta	10/21/10 03:06 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.541s Queries: 16 (3.539s) Memory: 0.6097 MB (Peak: 0.6427 MB) Data Comp: Off Server Time: 2026-06-17 06:27:16 UTC
Valid HTML 5 and Valid CSS