In the middle of a 3.0 teardown for head gaskets...

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

In the middle of a 3.0 teardown for head gaskets... #1012123 11/02/10 01:45 AM

Joined: Sep 2003

Posts: 1,686

Phoenix, Az

Staceman

Body Damage is Cool

How in the heck am I supposed to remove the 6 exhaust crossover nuts? Got 2 each side out, worked on the last 2 for a little bit, then called it a day. Anyone with first hand experience got any suggestions?? My first 3.0 gasket swap. Any help greatly appreciated!!

85 4Runner - With NEW Marlin 4.7 Gears!! It's a whole new beast!

Entire Thread
Subject	Posted By	Posted
In the middle of a 3.0 teardown for head gaskets...	Staceman	11/02/10 01:45 AM
Re: In the middle of a 3.0 teardown for head gaskets...	Rodgertheshrubber	11/02/10 03:52 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.659s Queries: 15 (4.169s) Memory: 0.5943 MB (Peak: 0.6273 MB) Data Comp: Off Server Time: 2026-11-07 00:42:05 UTC
Valid HTML 5 and Valid CSS