Quote
I checked the voltages they look good.
I was having a problem finding a good ground when in low beam however....?


Well the head lights are switched ground, meaning the low beam terminal has a ground switched via the column dimmer (combo) switch. So if you do not see close to 0 volts at that terminal in low beam mode, that is your problem. In this case, 0 volts = good, 12 volts (or anything over 0.5 volts) = bad.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code