how hard is it to put a 4.3 in a 87 ram 50

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: how hard is it to put a 4.3 in a 87 ram 50 [Re: Red1979] #1012421 11/10/10 06:28 PM

Joined: Sep 2008

Posts: 509

Tucker, Ga

willwinchforfood Offline

Rock Warrior

Does the 2.4 bolt up to the 5 speed and or the auto for the 2.6 and or the 3.0?
John

Last edited by willwinchforfood; 11/10/10 06:29 PM.

SOLD!!: 91 LS 95 SR Rear LSD front 95 LS front brakes Dons Bumper 10k Gorilla/Promark winch Safari Snorkel Dual bouncy 31's

1991 Chevy Suburban 33's. All other stock.

Entire Thread
Subject	Posted By	Posted
how hard is it to put a 4.3 in a 87 ram 50	Red1979	11/07/10 04:21 AM
Re: how hard is it to put a 4.3 in a 87 ram 50	hazy_daze	11/07/10 06:25 AM
Re: how hard is it to put a 4.3 in a 87 ram 50	lordtrunks	11/09/10 06:44 PM
Re: how hard is it to put a 4.3 in a 87 ram 50	willwinchforfood	11/10/10 06:28 PM
Re: how hard is it to put a 4.3 in a 87 ram 50	lordtrunks	11/10/10 10:15 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.518s Queries: 16 (3.515s) Memory: 0.6015 MB (Peak: 0.6344 MB) Data Comp: Off Server Time: 2026-06-23 14:26:28 UTC
Valid HTML 5 and Valid CSS